Sunday, February 5, 2017

Stunning Stars Quilt #2 - "Exploding Stars"!!


Hi, all!

Welcome to the second week, and the second quilt, of the Stunning Stars Quilt Along!  Last week I shared a super simple star quilt called "Scrappy Stars"...


...and I've been so excited to see some of you already working on your own versions!  So simple, and a great way to use up scraps and leftover charms and layer cake bits and pieces.  

This week I've decided to revisit one of this blog's most-pinned quilts from the past...


This quilt was originally designed for the Sweet Sixteen Quilt Along in 2015, based on a block design by Judy Martin called Star Cluster.  I transformed it into a one-block quilt called Interlocking Stars.  Rather than repeat the same quilt, though, I decided to ramp up the "star power" of this quilt, so here's this year's version - Exploding Stars!


The stars in this version are made using scraps and small yardage leftovers from my solids stash - all of which has been getting way out of hand lately!  It felt good to whittle some of that down.  


I love the way the colors play so happily on the Kona Graphite background fabric (also from my stash!)


Lots and lots (and lots and lots and lots) of straight line quilting on my long arm quilting machine, Jolene, give this quilt some fabulous texture!!  It's so soft and supple after washing, too...


And I dug through stash for some long-forgotten yardage for the back, too!  This quilt certainly fits into the criteria of #SewMyStash2017!!

So - - - do you want to give this one a try?  Here are the directions!




A few notes:  (1)  This quilt is scrap friendly. Just be sure you have enough of your chosen fabric to cut all the pieces you need!  (2)  I prefer to cut my pieces a little oversized and then trim them down to size after piecing. This helps me get nice points when I piece.  I've listed the sizes for cutting that I used, which is about 1/8” of an inch larger than shown in EQ7. (3) I really recommend that you square up your HSTs after making them.  This will make your quilt go together so much more nicely, and you'll be happier with the result in the end!

Fabric Requirements (I used solid scraps for my version, and just made sure that I had enough material to cut the number of pieces I needed from each):

Let’s work from the inside of the stars to the outside.

For each inner star, you will need:

1 - 4 1/4” square
4 - 2 3/4” squares for HSTs

There are four inner stars.

For each middle star, you will need:

4 - 4 3/4” squares for HSTs
4 - 2 3/4” squares for HSTs
4 - 2 3/8” squares for corners

There are four middle stars.

For each outer star, you will need:

4 - 8 1/2” squares for HSTs
4 - 4 3/4” squares for HSTs
4 - 4 1/4” squares for corners

There are four outer stars.

Background fabric (about 2 1/2 yards will give you enough for background and binding):

  From the background fabric, cut four 8" squares, and four 8" x 30.5" strips. These will complete the background of the center of the quilt. (The easiest way to cut these is four 8" width-of-fabric (WOF) strips, each divided into one 8" square and one 8" x 30.5" strip.)  Don’t cut the 30.5” strips to their final length until you are ready to work them into the quilt, to ensure that they are the correct length.
12 - 8 1/2” squares for HSTs

  2 - 2.5” x 60” strips (cut these after assembling the stars, to ensure that they are the correct length.)  

  2 - 2.5” x 64” strips (cut these after assembling the stars, to ensure that they are the correct length.)  

******

Begin by deciding your color layout - the inner, middle, and outer star colors for each of the four stars.


Now assemble the inner stars for each.  For this you will need the inner 4 1/4” center square, the 2 3/8” squares for the corners, and the inner and middle 2 3/4” squares which will be made into HSTs.  Using the traditional method for making HSTs, create the points of your star using the 2 3/4" inner- and middle-colored squares.  Square up the HSTs to 2 3/8".  Lay out your star block. assembling the sides and attaching them to the center, then assembling the top and bottom and attaching them to the center.


Now you will build the next ring out.  For this you will need the outer 4 1/4” squares for the corners, and the outer and middle 4 3/4” squares which will be made into HSTs.  Using the traditional method for making HSTs, create the star points using the 4 3/4" outer- and middle-colored squaresSquare up the HSTs to 4 1/4". Lay out the pieces, assembling the sides and attaching them to the center, then assembling the top and bottom and attaching them to the center.

Now comes the (slightly tricky) part.  Take the outer 8 1/2” squares, using three of each color and setting one of each color to the side for later use.  Take the twelve 8 1/2” background squares and draw a diagonal line on the back of each one.  Pair a background square with a colored square and make your HSTs.  Square up the HSTs to 8".  You should have six of each color.

Now take the 8 1/2” squares you set aside in the previous step and cut them in half diagonally.  Referring to the diagram, match the colors up to create the HSTs that interlock the stars (where the stars touch, sharing an edge).  Square up the HSTs to 8".

Sections are "blown out" to show how to assemble.
Lay the pieces out on your design wall/floor.  Assemble the four units shown here.  Measure the long edge of each unit to determine the correct length for the background strip, cut and attach to the side of each unit.  (Hopefully, these will all be the same size!)

Assemble the four units into the center unit of your quilt top.  

Sew your 2.5” background strips together end to end.  Measure the center unit from top to bottom through the center, then cut your strips to that measurement and attach to each side of the center unit, easing as needed to make them fit.  This will help square up your quilt top.  Repeat for the top and bottom, measuring the center unit from side to side across the center.

This quilt finishes up at about 64" square.


There you go!  You’ve got a finished quilt top!!

*&*&*&*&*&*&*

I hope you like this quilt as much as last week's - even though it's a bit more involved, it's still fairly simple to construct.  Squaring up those HSTs make a world of difference!  If this week's quilt isn't your cup of tea, hang in there - there's four more to come!


And after those four, it's time to start the Hands2Help Charity Quilt Challenge 2017!  The new button is up on the right sidebar if you want to grab it for your own blog.  I'm still finalizing the charities for this year, but that info will be available soon.  The new schedule is posted on the Hands2Help page above if you want to see it.  

If you are interested in being a guest blogger for this year's event, I have five spots available.  You can either leave a comment below (be sure to leave your email address just in case you're a no-reply blogger) or email me directly at salliesue57 (at) gmail (dot) com if you want to be a part of it!  And many of you have been sponsors in past years - if you want to do that again, please let me know!  This really is a group effort, and that's the whole reason it's been so successful and so much fun!  Thanks in advance to everyone for all their help!!

Hugs!

Sarah

35 comments:

  1. Love it! It looks far more complicated than it actually is. Thanks for the great pattern.

    ReplyDelete
  2. Now this one I must make, but I'm changing the cuts a little - hate odd cuts.

    ReplyDelete
  3. Count me in for Hands2Help. Really enjoying the Stunning Stars qal :)

    ReplyDelete
  4. I am going to make this one for QOV! I don't have a lot of solids so I will have to play around with maybe solid outside stars and inside the stars use prints. My hubby said it would look like fireworks! Thanks for the pattern!

    ReplyDelete
  5. Sarah...I certainly want to be involved in the Hands2Help. I love creating quilts for charitable organizations! I would also love to be a guest blogger. Please send me the details on this! Thanks!! shabbyislandtreasures@gmail.com

    ReplyDelete
  6. Im going to finish last week's quilt this afternoon. I love the look of Exploding Stars. I do wish there was a PDF with directions so I could print them off. Thanks! villacrestfarm@gmail.com

    ReplyDelete
  7. I love the look of this one. It does look more complicated than it is. Of course I would prefer to make flying geese for the sides/points of the inside star.

    ReplyDelete
  8. I loved Judy's original pattern, and the way you have adapted it is genius! The solids work beautifully, and I adore your color choices. I am getting ready to start my third baby quilt using this pattern. Thanks for all the inspiration!

    ReplyDelete
  9. what color thread did you use so that it is the quilt pattern that stands out but not the thread? I will be machine quilting my Scrappy Stars (totally different quilt) with straight lines and want the pattern not the quilting to be what people see first.

    ReplyDelete
  10. Oh my, I love this! I made the one from the Sweet Sixteen and it was a favorite of mine. Thank you!

    ReplyDelete
  11. Wow! Wonderful quilt, clear directions. And I have a towering stack of solids. But, I'm trying not to start stuff. Are you planning to offer Printer friendly versions of your designs?

    ReplyDelete
  12. Oh my! Sarah, I surely LOVE this one! Not sure when I'll have time for it, but I will be making it this year! It is a stunner. I love your bright bold fabric choices and what a wonderful thing it came from stash and scrap!

    ReplyDelete
  13. This quilt has punch! Love it. It is one to keep in mind for another quick quilt fix. Thanks for the inspiration. ;^)

    ReplyDelete
  14. Love this, Sarah! Thanks for the great tutorial too!

    ReplyDelete
  15. This is such a fun design! Thank you for the tutorial. It looks beautiful!

    ReplyDelete
  16. I LOVE this!!! I'm definitely going to make this one. It's so striking in solids.

    ReplyDelete
  17. WOW! Your quilt tutorial is fantastic! I would like to be a guest blogger with a tutorial and a sponsor for Hands2Help again this year.

    ReplyDelete
  18. Wow, that design really packs a punch! I love it!...ugh, one more for my 'to-do list'! I will definitely be participating in H2H this year.

    ReplyDelete
  19. Love star quilts. I started a batik/solid version.

    ReplyDelete
  20. I haven't finished my scrappy stars yet, but this one will be next!

    ReplyDelete
  21. LOVE this quilt. Great use of solids and stash fabrics. Haven't used Graphite before but it's perfect with those solids.

    ReplyDelete
  22. Love this quilt--I've been so anxious to see the whole quilt because I fell in love with it from your first sneak peak! Great design and tutorial--putting this at the top of my list!

    ReplyDelete
  23. Oh, this is funny. I squirreled with this design yesterday, working from a picture I had saved, then went hunting online this morning to find the original inspiration so I could give credit. And here you are featuring the quilt again this week :) Seems that even squirrels have a good sense of timing sometimes! I'll go get my borders on, then link up with you on Friday. Have a great day!

    ReplyDelete
  24. Oh, this is funny. I squirreled with this design yesterday, working from a picture I had saved, then went hunting online this morning to find the original inspiration so I could give credit. And here you are featuring the quilt again this week :) Seems that even squirrels have a good sense of timing sometimes! I'll go get my borders on, then link up with you on Friday. Have a great day!

    ReplyDelete
  25. Hi, love this pattern. I think I'll give it a shot for my next Honor Flight quilt. It will be wonderful in Red, White and Blue. Count me in as a sponsor. I'll let you know what once I get it.

    ReplyDelete
  26. I love your exploding stars. Quilts made from solids are always striking. Just stunning!

    ReplyDelete
  27. That is so cool! I want to get started quilting, so I've been looking around at different ideas. Great design! :) Lisa

    ReplyDelete
  28. I love this pattern but I'm confused by the amounts listed. Specifically:
    For each middle star, you will need:

    4 - 4 3/4” squares for HSTs
    4 - 2 3/4” squares for HSTs
    4 - 2 3/8” squares for corners

    There are four middle stars.

    For each outer star, you will need:

    4 - 8 1/2” squares for HSTs
    4 - 4 3/4” squares for HSTs
    4 - 4 1/4” squares for corners

    For the middle - why do you need (4) 2 3/4" squares? Aren't all the HST's the same size and wouldn't you need 4 of each color. Same for the outer - why do you need (4) 4 3/4" squares instead of (8) 8 1/2" squares? Maybe I do my HST's differently but they look to be all the same size for each star. Thanks. It's beautiful.

    ReplyDelete
    Replies
    1. Hi, Gretchen!

      Each ring of the star has a different size of HST. The center ring has the smallest, the middle ring has a medium size, and the outer ring has a large size. But because they interlock, each ring has HSTs that contain the color of the ring next to them. That's why the middle and outer rings have two different sizes for HST blocks. I think, if you'll look at the line drawing of the pattern, you'll see that this more clearly than by looking at the quilt itself. So I'm 99% sure they are right. But if you find a mistake, please let me know so I can correct it!
      FYI You appear to be a no-reply blogger, so leave your email address!

      Delete
    2. I understand it now - I was looking at each square as a separate entity (regardless of color) whereas your measurements are for each color star. Makes sense now. Again, it's lovely. I'm adding it to my very long "want to do" list. Thanks.
      gmdietz57@gmail.com

      Delete
  29. Gorgeous pattern, please may I have a pdf ?stephen_jenny@hotmail.com.
    Many thanks Jenny

    ReplyDelete

Comments make me smile!! If you want a PDF of a pattern, PLEASE leave your email address in your comment, or email me directly at salliesue57 (at) gmail (dot) com!